NIPPON PAINT EA4 FINISH NON-SKID is a three-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended to impart non-skid property on slippery surfaces. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete the surface should be acid-treated prior to application of NIPPON PAINT EA4 FINISH followed by NIPPON PAINT EA4 FINISH NON-SKID.
|
Product Features: |
Coating System
| Concrete / Cement Floor | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Primer/Sealer | Nippon Paint Penetrative Epoxy Primer/ Nippon Paint EA4 Finish*/ Nippon Paint EA9 Finish* | 1 coat |
| Topcoat | Nippon Paint EA4 Finish Non-Skid | 2 coats |
| Steel | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Primer/Sealer | Nippon Paint EA9 Red Oxide Primer | 1 coat |
| Topcoat | Nippon Paint EA4 Finish Non-Skid | 2 coats |
| Tiles / Ceramic Surfaces | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Primer/Sealer | Nippon Paint Tile Primer / Nippon Paint EA9 Finish HB | 1 coat |
| Topcoat | Nippon Paint EA4 Finish Non-Skid | 2 coats |
Application Data
| Application | Brush/Roller, Compressed Air Spray, or Airless Spray (preferably use if a thicker coat is required in one application) |
| Thinning | Thinner: SA-65 Thinner Brush/Roller: If necessary, add about 5% thinner by volume Compressed Air Spray: If necessary, add about 10-15% thinner by volume |
| Touch Dry/ Hard Dry | 2-3 hours / 16 hours |
| Recoating Interval | Minimum 16 hours |
| No. of Coat(s) | 1-3 coats |
| Theoretical Coverage | 6.4 - 10.2 m² per litre per coat |
