NIPPON PAINT EA9 HOLDING PRIMER FD is a two component, fast drying amine cure epoxy coating designed for use as a high-performance primer and finishing coat for many types of surfaces i.e. aluminium, EG, galvanising, steelwork, concrete and many plastic surfaces including Fibreglass Reinforced Plastic (GRP/ GFRP) and Phenolic sheeting. It has been extensively used as primer coat for ferrous and non-ferrous surfaces within the ACP, FRP/ GFRP, door and transport industry and offer a high degree of protection even in aggressive environments.
|
Product Features: |
Coating System
Application
Coating System
| Galvanized Steel / FRP / GRP | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Primer/Sealer | Nippon Paint EA9 Holding Primer | 1 coat |
| Topcoat | Nippon Paint Polyurethane Recoatable Finish | 2 coats |
Application Data
| Application | Brush/Roller, Compressed Air Spray, or Airless Spray |
| Thinning | Thinner: SA-65 Thinner Brush/Roller: If necessary, add about 5% thinner by volume Compressed Air Spray: If necessary, add about 10-15% thinner by volume |
| Touch Dry/ Hard Dry | 20-25 minutes / 6 hours |
| Recoating Interval | Minimum 6 hours |
| No. of Coat(s) | 1-2 coats |
| Theoretical Coverage | 5.6 - 8,0 m²/litre (depending on the dry film thickness) |
