Nippon 8048 is a two-pack epoxy polyamide coating, specifically designed for use on steel surfaces that cannot be abrasive blast cleaned. It provides a high build impervious barrier coating that gives excellent adhesion and surface wetting properties on manually prepared, rusty steelwork. Its unique combination of anti-corrosion pigments and rust penetrants provides excellent corrosion resistance in virtually any environment.
Nippon 8048 can be used either as a high build primer or a self-priming high build finish under non-immersion service.
Coating System
Application
Coating System
| Steel | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Primer/Sealer | 8048 Zinc Phosphate Primer QD | 1 coat |
| Intermediate | Nippon 8048 | 1 coat |
| Topcoat | Pu Recoatable Finish | 1 coat |
Application Data
| Application | Brush, Roller |
| Thinning | Brush, roller: 10% - 15% by volume of SA-65 Thinner |
| Touch Dry/ Hard Dry | 3 - 4 hours / 16 hours |
| Recoating Interval | Minimum 16 hours |
| No. of Coat(s) | 1 - 2 coats |
| Theoretical Coverage | 9.0 m² per litre (for dry film thickness of 100 microns) 3.6 m² per litre (for dry film thickness of 250 microns) |
